Description of Individual Course Units
Course Unit CodeCourse Unit TitleType of Course UnitYear of StudySemesterNumber of ECTS Credits
CIZ301COMPUTER AIDED DRAWING AND DESINGElective354
Level of Course Unit
First Cycle
Objectives of the Course
To introduce two-dimensional computer drawings of objects and techniques. To teach techniques to create technical drawing objects in computer studies and plotted output from a printer or plotter. Storage of information and to explain the procedures for sending to other sources.
Name of Lecturer(s)
Prof.Dr. Erdem AYKAS, Asist. Prof. Dr. Bülent ÇAKMAK
Learning Outcomes
1To draw a technical files according to the rules of geometric drawings on the computer via drawing software
2To take sectional view according to the rules of geometric drawings on the computer via drawing software
3To make dimensioning according to the rules of geometric drawings on the computer via drawing software
4To save the files on the computer generated technical drawings, and get plot out, to send the generated files to other sources
Mode of Delivery
Face to Face
Prerequisites and co-requisities
The sufficient knowledge of technical drawing and ability of using computer.
Recommended Optional Programme Components
None
Course Contents
To set used toolbars on graphical drawing area. To create a drawing file. To explain relationship between upper and lower version of same softwareTo save file, to save file with another format and names, close and exit from software. To use command line To introduce coordinate systems used in softwareTo create an object using different coordinate systems in sofware To introduce different cursor modes and coordinate displaysTo define view ports on graphical drawing areas and create multiplex view.Object editing commandsCommands related to all side of object Commands related to one side of object To use pattern and setup drawing elementsTo create a dimension on objects; Distance, area, perimeterTo create and isometric drawing To make dimensioning of all drawing file To create sectional view To use layer To display plot out and settings To make page setup To cerate a surface 3D editing commands; Extrude, Revolve, Subtract, Intersect, Interfere, Union, RotateTo set user coordinate system To use calculation command To hand over file about drawing applications
Weekly Detailed Course Contents
WeekTheoreticalPracticeLaboratory
1To introduce CAD and explain content of course To introduce using software during the course. To give setup procedure of software. To run software and organize all drawing settings. To introduce software interface To introduce toolbars and popup icons. Pull-up menus Command line Short line types Recent used commands Other toolbars To set used toolbars on graphical drawing area. To create a drawing file. To explain relationship between upper and lower version of same software. The commonly used file types in software To save file, to save file with another format and names, close and exit from software. To use command line Flexible command; Zoom, Pan, Move To use ALT buttons in software To use CTRL buttons in software Introduction to course + To provide information about computers and software.
2To make an object definition To use “line” command To introduce coordinate systems used in software Polar coordinate system Absolute coordinate system Cartesian coordinate system Relative coordinate system To create an object using different coordinate systems in software To introduce different cursor modes and coordinate displays Lecturing + Video and slide presentation. The topics discussed in the course of implementation.
3To snap an object To select and edit methods of objects in software. To use “grips” editing of objects Lecturing + Video and slide presentation. The topics discussed in the course of implementation.
4Object drawing commands Line, ray, construction line, multiline, polyline, point, RectangleLecturing + Video and slide presentation. The topics discussed in the course of implementation.
5Object drawing commands Polygon, spline, circle, arc, elipse, arcellipse To use “Pedit” command for editing whole type polylines. To define view ports on graphical drawing areas and create multiplex view. Lecturing + Video and slide presentation. The topics discussed in the course of implementation.
6Commands related to all side of object Erase, copy, mirror, offset, array, move, rotate, scale, strech Align, Explode Commands related to one side of object Trim, Break, Chamfer, Fillet, Divide, measure, Extend, Reference, Lenghten Lecturing + Video and slide presentation. The topics discussed in the course of implementation.
7Object editing commands Commands related to one side of object Trim, Break, Chamfer, Fillet, Divide, measure, Extend, Reference, Lenghten Lecturing + Video and slide presentation. The topics discussed in the course of implementation.
8Midterm exam
9To use pattern and setup drawing elements Hatch, Line type, Change, Properties, Match properties To use predefined object via selected command; Block, Region To create a dimension on objects; Distance, area, perimeter Lecturing + Video and slide presentation. The topics discussed in the course of implementation.
10To create and isometric drawing Lecturing + Video and slide presentation. The topics discussed in the course of implementation.
11To make dimensioning of all drawing file To recall rules of dimensioning on technical drawing To setup dimensioning settings Extend lines Dimension lines Arrow heads Dimension texts and settings To create sectional view To create full, half, and predefined sectional views Hatch pattern and pattern scale Lecturing + Video and slide presentation. The topics discussed in the course of implementation.
12 To use layer Layer commands and the concept of active layer To display plot out and settings To create a field text To make page setup To take a plot out or printout Lecturing + Video and slide presentation. The topics discussed in the course of implementation.
13To introduce 3 D modeling Wireframe and solid concepts To cerate a surface To work with primitive solids To create a third dimension on 2 dimension object 3D editing commands; Extrude, Revolve, Subtract, Intersect, Interfere, Union, Rotate Lecturing + Video and slide presentation. The topics discussed in the course of implementation.
14To set user coordinate system To use calculation command To hand over file about drawing applications Lecturing + Video and slide presentation. The topics discussed in the course of implementation.
15Practical examExam
16Final exam
Recommended or Required Reading
CGök A., Gök K., 2008 AutoCAD 2008, Seçkin Yayıncılık, 459 sayfa ISBN: 9750205910 (Türkçe) Baykal. G. 2006. AutoCad 2007, Pusula Yayıncılık ve İletişim,824 sayfa ISBN:9756477830 (Türkçe) Çakmak, B., Aykas E., Bilgisayar Destekli Tasarım Ders Notları
Planned Learning Activities and Teaching Methods
Activities are given in detail in the section of "Assessment Methods and Criteria" and "Workload Calculation"
Assessment Methods and Criteria
Term (or Year) Learning ActivitiesQuantityWeight
SUM0
End Of Term (or Year) Learning ActivitiesQuantityWeight
SUM0
SUM0
Language of Instruction
Turkish
Work Placement(s)
None
Workload Calculation
ActivitiesNumberTime (hours)Total Work Load (hours)
Midterm Examination122
Final Examination122
Attending Lectures14228
Practice14228
Report Presentation14228
Project Preparation5210
Individual Study for Mid term Examination11111
Individual Study for Final Examination11111
TOTAL WORKLOAD (hours)120
Contribution of Learning Outcomes to Programme Outcomes
PO
1
PO
2
PO
3
PO
4
PO
5
PO
6
LO113    
LO223    
LO323    
LO433    
* Contribution Level : 1 Very low 2 Low 3 Medium 4 High 5 Very High
 
Ege University, Bornova - İzmir / TURKEY • Phone: +90 232 311 10 10 • e-mail: intrec@mail.ege.edu.tr